Christmas Ornaments free pattern and tutorial

Free pattern templates and tutorial for Christmas ornaments by Felicity Patterns

The pattern templates for the Christmas Decorations can be downloaded from the SHOP just select free patterns from the Menu.

Here is the tutorial for the free pattern download for four quick and easy to make Christmas tree ornaments. Tree ornaments can be expensive to buy and it is fun to make your own; mine didn’t cost me anything as I simply used materials that I already had left over from previous projects.


To Make the Christmas Ornaments.

You will need some pieces of felt, print fabrics, polyester wadding, assorted buttons, lace, braids or ribbons, beads to thread, bells, sewing threads, fine string or thick thread for stringing beads. Tools required include pinking shears, plain scissors, regular size hand sewing needle and large eyed needle for threading beads, pins, craft glue, sewing machine and iron. You can also add stick-on sparkly thingies to catch the light and make them twinkle.

I have made my ornaments the quick way sewing by machine but if you are an experienced crafter you might like to sew them by hand. I have used pinking shears to cut out for machine sewing but if you are over-stitching the edges by hand cut them out with plain shears.

The tutorial shows how to construct the star and string 3 together with beads to make a long hanging ornament. All the ornaments are basically constructed in the same way so follow the star tutorial to make the boot, bell and ginger bread man. Any trimmings that need to be machine stitched onto the backs or fronts of the shapes is best done before joining at the edges. Hand sewing or gluing buttons, beads etc should be done after the shapes are sewn together with the wadding inside. For the single ornaments a hanging loop can be stitched in when sewing the parts together.

Making the ornaments:

Print and cut out the templates; for the stars cut out both sizes.

The photo shows the basic components for one ornament: felt front piece, print centerpiece, backing print, wadding, centre buttons and string for hanging.



Using pinking shears cut the large star in felt and backing print and use the small star to cut the print fabric for the centre front and the wadding.

Below are all the parts needed for the 3 star ornament, plus you will also need to add 3 more buttons for the backs of the stars.


Sew the smaller centre print star shape onto the larger felt shape using a plain machine stitch.

Make a sandwich with the backing, wadding and felt, pin to hold and stitch together around the edges.


 When all 3 stars are sewn together lay out so there is a point at the top, space about 5cm/2″ apart. Roll out a length of heavy thread for the beading, long enough to have a tail at the bottom and a hanging loop at the top. Count out an equal number of beads for the spaces between the stars and enough for the tail and loop.
 Start threading by tying a large tinkle bell to the end of the tail thread, thread the top end through a large eyed needle and thread the tail-end beads on from the top end.
 When the tail section is threaded insert the needle into the bottom of the first star and push through the inside and out at the top point of the star. Thread the next section of beads including a smaller bell and so on till each section is done.
 When you get to the top loop, thread the last lot of beads finishing with a tinkle bell and tie the thread of in a large loop.
To finish hand stitch a button to the centre front and back of each star.
Back side of stars
Xmas ornaments
Front side of stars
All the ornaments are made using the same method as for the star.


Free Pattern! Cross-back Apron for Mothers and Daugthers

Free Pattern. Easy to make the Cross-Back Apron for adults and children by Felicity Sewing Patterns

Welcome to the Cross-back Apron free pattern download. To get your free pattern download go to the SHOP, select Free Patterns from the Menu and put the pattern in your cart and “buy” it for free.

In the pattern file you will find two separate patterns for the adult and kids aprons; please print each pattern separately to save confusion. This file contains only the patterns and instruction sheets for printing and assembling the patterns the sewing tutorial is posted here on Felicity Sewing Patterns BLOG.


Description: This is by far my favourite apron style; it covers everything and is easy to slip in and out of with no ties just simple cross-over straps. It has a large pocket at the front which also gives extra reinforcement just where the apron gets the most wear. For the apprentice chef in your life there is the kid’s version which is identical to the adult shape but comes in sizes to fit kids aged from about 4 to 10 years old. The fit is very flexible and getting it just right depends on adjusting the finished strap length to your perfect fit. The Apron is very quick and easy to sew, a perfect project for beginners.

Sizes: Both patterns come in sizes small, medium and large. Check the size chart for a guide to the best size to use. Please note the adult pattern must have extra length added to the bottom edge.

Fabric: I prefer to use a heavier weight cotton or poly/cotton for a kitchen apron so a cotton drill or ducking is suitable; denim is also a great choice. I have used a cotton furnishing fabric which has the added benefit of being a wider width at 124cm/49”. See the fabric chart for amount required. The only other thing you need is matching thread.

Crossback Apron Size Charts


Follow the instructions in the pattern file to print and assemble the patterns and check the size chart for the best size to use. The size chart gives a guide to the approximate body size for the small, medium and large sizes for both kids and adults.

Cutting Guide:

The adult pattern must have extra length added to the bottom edge: I added an extra 16cm/6 ½” inches to my medium size apron so that it reaches just past knee level.

The pattern is easy to adjust if required; length can be added or reduced at the hem and the sides can be extended for more wrap at the back. Extra length is included on the strap pattern so that you can adjust the straps to suit your own height. It is best to trace the pocket patterns out as full pieces. Follow the cutting instructions on the pattern. When laying up the patterns to cut out check that the fabric print is not a one-way print if this is the case you must place all the patterns in the same direction. Make sure to clip the notch marks for the hem turnings. If you are tall it might be wise to add extra length to the straps as this can be adjusted later.

I had to join two photos to get the whole layout in.



Everything cut out and ready to sew for adult & child aprons in size medium.


Sew the Apron

Before you start mark the centre top position for the pocket. On the centre front fold edge of the apron pattern you will see a notch mark for this so put a chalk mark or pins to mark this point on your apron front.



1/ All the edges except the bib have a 2cm/3/4” hem allowance. Press the hem allowances under with a double turn using a fairly hot iron depending on the fabric you are working with.

Start with the curved side edges and press under 1cm then turn again 1cm and press. The bias grain on the edge will allow the hem to turn without buckling but take care not to over stretch. Sew down. Next press the bib hem edge under 1cm and again 2.5cm and stitch down.



Go to the bottom hem edge and press this under 1cm and 1cm then do the same on the side edges. You should have a double turned hem all around with a finished width of 1cm/3/8”. Sew down all around.



2/ Make the pocket.

Press a 1cm/3/8”single turning on the sides and bottom edges, then press the top edge under 1cm/3/8” and again 2cm. Stitch the top hem down. You can overlock the edges but I didn’t bother.



Position the pocket on the front of the apron using the centre point you marked earlier. Place the centre of the pocket’s top edge at the mark and ensure that the pocket is perfectly squared up to the hem and side edges of the apron. Pin to hold in place and stitch on close to the edges making a couple of double reverses at the two top corners for extra strength. The pocket can be divided into two by sewing through the centre from top to bottom. The kid’s pocket is best left as one large pocket.



3/ Make the straps.

Fold the straps in half with wrong side out and sew along the length, leave a 3cm gap midway to turn out; sew across both ends. The seam allowance is 6mm/1/4”. Turn the straps through and press to smooth out the seams. Hand stitch the gap closed or sew a top stitch around the entire strap close enough to the edge to seal the gap.




Attach the strap ends to each side of the front bib stitching securely to hold. There is a 2cm/3/4″ allowance for this.



Cross the straps over and pin the ends to the back corners of the apron. The straps should be longer than required so start by pinning them so that there is about 4cm/1 ½” excess.



Now it is best to try the apron on to be sure to get the correct strap length for your height. To get the correct fit the bib should be fairly high on the chest and the apron should fall and wrap smoothly around the hips without any dragging or excessive gape at the curved side edges although there will be some gape here as there are no darts to shape the edge to the body. Take a close look at the finished photos to see how it should look. If the back of the apron is swinging forward the straps are too long and if the back is pulling up or the sides are gaping a lot then the straps are too short. Don’t make the straps too short or  it will be difficult to get the apron on and off.

Correct strap length. = minimal gapping and no swinging or dragging.

11a 13


If you are making for gifts or to sell then attach the strap with a 2cm allowance at the front and with an excess of 4cm/1 ½” at the back.

It is also possible to make adjustable straps by using a slide buckle attached at the front bib. Add extra length to the straps for this.

I hope you all enjoy your aprons! I love mine and plan to make more for friends and family.

Crossback Apron front back


Santa Sack Sewing Tutorial and Free Applique

Christmas Santa Sack sewing tutorial plus applique design by Felicity Patterns

You can download the Santa Sack tutorial pdf file including the Rudolph applique template from the SHOP go to the Free Patterns shop section on the Menu. The tutorial can be viewed here on the Blog page.

A santa sack can be made any size and with a combination of fabrics plus there is the new free ‘Rudolph’ applique that can also be added to make a fun looking santa sack. The applique can be used in a multitude of ways e.g. on clothing, aprons, cushions, bags etc.

I have made my sacks using two contrasting fabrics but you can make them all in one fabric or using multiple combinations. You can also add braid trims, bells, bows or anything you fancy. I’ve made three sacks to demonstrate; one version has the applique.

3 Santa Sacks smaller


The Rudolph applique comes in two sizes but it can be altered to any size by using the photo copy function on a printer to reduce or enlarge the parts.


1/ Print out the template pages from the pdf file. Choose the most appropriate size to use.

2/ Fabric in small quantities for the component parts: best fabrics to use are wool felt or solid cottons since they will need to take a hot iron to fuse the applique. Check the template and the photos to see what you will need. I used wool felt for the main parts and added some cotton stripe to the inner ears and for the bow tie. You can use plastic goggle eyes if you prefer.

3/ Applique adhesive backing; about 20cm/ 8″ square. You can buy this at fabric and craft stores.

4/ Printer, sharp scissors, an iron and pressing cloth, a needle and thread, pins.

5/ Cut out the parts for the santa sack as required and press smooth. See below for cutting out and making the santa sacks.

I did not stitch my applique onto the bag as I would have done if I was applying it to clothing where it would get a lot of wear and washing. to see how to stitch an applique by machine take a look at the DUCKIE SKIRT TUTORIAL on this blog page. The other option if you like a handcrafted finish is to attach it with a fine hand stitched blanket stitch around the edges.

1/ Print out the template.

12/ Roughly cutout the shapes in fabric and adhesive backing. Fuse the fabric [felt] and adhesive with a hot iron. Use a pressing cloth to protect the iron.

23/ Pin the template in place and using sharp scissors trim the shapes exactly to the template outline. Do this for all the applique parts.

34/ Work out the position for the applique. For my santa sack I placed it in the centre and 3-4cm / 1-1/4″ — 1-1/2″ up from the bottom edge. Use the printed illustration as a guide to layout all the parts correctly.6 position5/ Fuse the applique parts to the fabric. Peel the paper backing off all the parts. The sequence for fusing on the parts is: ears, face, antlers, nose and eyes. The face should just slightly overlap the ends of the ears and the antlers should overlap the top of the head. Fuse the two ear parts in place first then continue the sequence using a hot iron and pressing cloth. You will need to apply some pressure with the iron.
710If you are going to stitch the applique do this now. It is now ready to complete sewing the santa sack.                                                                                                                                           6/ Make the bowtie. Cut a strip of fabric 8cm X 20cm / 3-1/2″ X 8″ [ I cut the stripes on bias]. Press the edges to the centre and fold over to form a bow shape. Use a small rectangle of fabric for the keeper and wrap this around the bow and stitch by hand. It’s best to attach the bowtie after the bag is sewn together.1617



MAKE THE SANTA SACKS  The Santa Sacks can be made any size or shape depending on what you want to fill them with: large enough to stuff with toys or small and delicate, just the right size for a bottle of perfume, a jewelry box or a mobile phone. The basic sack is a simple rectangle of fabric sewn together to form a bag with a facing or a deep hem allowance on the top opening. I have made all my bags using two prints but you can vary this to suit. I have added ties to all my bags.




1/ Fabric: the amount will depend on the size of the bag so it’s best to work out the overall finished size of the sack first. It’s a good idea to draw this out on paper and then devide it up for a border or whatever combination of fabrics you want to use. Remember to add seam allowances to panels or borders. Fat quarters can work well for the sacks. If you want to make fabric ties include enough for these depending on the width and length of the finished tie.

2/ Thread for sewing.

3/ Trims: optional: add braid or ribbon trims or other decorative effects. Note: you can make the ties or handles using the fabric as I have done or use tape or ribbon instead.

4/ Sewing machine, scissors, pins, tape measure/ruler, iron, paper.


1/ Cut out the sack: I had large enough pieces of fabric to cut my bag in one continuous piece but it can be cut in two parts as in a back and front. The overall finished size of this bag is 50cm high X 40cm wide [approx. 20″ X 16″]. The finished width must be doubled when cutting all in one piece and seam allowances added. I divided the length for a contrast border 8cm / 3″ wide. The facing is 7cm / 2-3/4″  wide or it can be a little wider for a large bag. Alternately allow for a deep hem on the top if you don’t want a contrast facing.fabric parts2/ Applique: if using the applique position so that it will be in the centre of one side of the bag and closer to the bottom than top.position3/ Sew the border to the bottom and the facing to the top edge. Overlock the border seam. Press both seams.11Press the edge of the facing under 1cm / 3/8″. Then turn the facing under and press flat.124/ Sew the bag together: fold the whole thing in half or if in two parts place together and stitch to form a bag along the sides and bottom. Overlock or use a zigzag stitch to finish the seams. Turn the bag out and press the seams flat.135/ Stitch the facing down: fold the facing to the inside; this should be easy because you have already pressed it under before stitching the bag seams. Press the facing flat, pin to hold and stitch the edge down.14Turn out and give a final press.                                                                                                             6/ Make the fabric tie: I cut my tie 90cm X 8cm [ 36″ X 3″]. It can be any width or length depending on how large a bow when tied up. Make the tie in the same way as for a belt or strap. Fold the tie in half and stitch with a very narrow seam, leaving a small gap at the centre to turn through. Turn out and press. 19Stitch the centre of the tie to the side seam level with the bottom edge of the facing.bow tieAlternately use a handle or loop to hang the Santa Sacks up.loophandleStitch on Rudolph’s bowtie and it’s finished.finishedBelow are two finished bags made in the same way but in different sizes and with wider borders and larger bow ties. The left hand sack does not have a separate contrast facing but I have cut the main bag section long enough to include a deep 7cm/3″ hem.Santa sacks variationsMERRY CHRISTMAS!scroll










FREE ZigZag Shirring Tutorial & Toddler Dress Pattern.

 Shirred Dress 24 Shirred Dress

Welcome to this free sewing tutorial by Felicity Sewing Patterns. Zigzag stitched elastic shirring is an alternative to the bobbin shirring  method. The tutorial shows step by step how to make this useful and  and attractive application. All the information you will need to make  this adorable little shirred dress, including the pattern instructions,  are in the tutorial below.

See the notes at the end of the tutorial for the Shirred Top to match the Silly Frilly Shorts.

Zigzag tutorial 2

Zigzag Stitched Elastic Shirring

The shirring I am going to show you here is not made using shirring elastic on the machine bobbin. This method of shirring is made using narrow width flat elastic which is stitched on in rows using a zigzag stitch setting. I prefer this method because it is much stronger and longer lasting than bobbin shirring. Zigzag shirring gives a more professional finish, it is adjustable and you do not need as much fabric width as with bobbin shirring. Bobbin shirring is softer and most suitable for baby clothes. Zigzag shirring requires accurate, straight stitching, not hard to do if you take care, the results are worth it.

There is no pattern file for this dress as it is just a rectangle of fabric. The table below gives measurements for all the parts required to make the dress in sizes 1 to 6 years old.

The measurements are the basic requirements only; you can add to the width if you want more fullness. The length can be altered to suit a top or skirt without needing to alter the elastic requirements. If you want larger sizes you can add a minimum of 10cms or 4 inches to the width for every additional year of age, plus add length as required. When deciding on your own dimensions, remember to add 4cm or 1.5 inches for the hems at top and bottom.

You can add a contrast border: make this any width you like; 8 -12 cm wide is best depending on the size you are making. Subtract the width of the border from the overall length given in the table and remember to add a seam allowance for the joining seam.

The straps are 7cm / 2.3/4” wide for all sizes and the lengths are given in the table.

The loop: cut a small strip of self fabric 8 x 2.5cm or 3 x 1 inches.

Elastic: the only elastic to use for this method is a flat 3mm or 1/8” wide woven, flat elastic.

Rickrack braid: to fit the width of the skirt. Optional but very effective.

From sizes 1 to 6 you can cut the rectangle in one piece across the width of a 112cm / 45” cloth. The total meterage includes the straps but you will need to take into consideration if you are going to add a border in contrast fabric. Zip down to the end of the tutorial to find the size charts for body measurements in centimeters and inches.



Check the photo to see if you have cut all the parts you will need.

Main skirt piece, Optional border piece, Straps, Loop, Elastic  3mm / 1/8” x 5 rows. You will also need matching threads.

Start Sewing

1/ Prepare the elastic strips.

The only elastic to use for this method is a flat 3mm or 1/8” wide woven, flat elastic. Cut the elastic strips with 3 or 4 cm extra on the length of each piece; mark the exact measurement length with a pencil. Prepare 4 to 6 rows depending on the size you are making. I used 5 rows on my size 3 sample. Or you may want to do only 2 or 3 rows.



2/ Prepare the skirt: if your dress is in 2 pieces seam these together to form one long piece, overlock the top edge and press under 2cm/ ¾” and stitch this down.

The shirring rows are placed 15mm / 5/8” apart this is equal to 2 widths of the machine foot.

It is easier to sew straight if you mark each row with chalk pencil.

You could place the rows wider apart if you prefer.



3/ Set the machine: to sew the rows of elastic down you need to set the machine on a large/wide zigzag stitch. The stitch has to be wide enough to span the elastic without stitching it down but actually forming a small channel. Set the zigzag stitch to its widest and set the stitch length to the maximum length. Use plain all purpose sewing thread on the needle and bobbin.



4/ Stitch the elastic rows: flick the machine stitch back to plain stitch. Start at one side seam and sew the ends of all the elastic strips in place where you have marked the rows, back tack a couple of times to secure well.



Flick the stitch back to large zigzag and sew the first row along the edge of the hem turning. As you sew make sure that the stitching does not catch the elastic. When you start to run out of elastic, make sure the needle is down and gently tug on the end to pull the elastic through the stitching, keep going like this till you reach the other seam edge. Use a pin to secure the end of the elastic at the mark for the finished length.


Sew all the elastic rows the same way, make sure to smooth out the fabric as you go so you do not stitch tucks or gathers in with your rows. When you have all rows sewn and secured with a pin at the edge check the size and tension of the elastic now before you sew the loose ends down. The elastic should move freely through each small zigzag channel, so if you want to tighten it up you can pull on the ends. Be careful not to let an elastic end slip back down the channel. To finish set the machine back to the normal sewing setting and stitch each end with a couple of backtracks to secure well.


A good rule of thumb for getting the elastic tension right is to set the finished length about 6 cm / 2.1/2″ smaller than the body measurement e.g. if a size 3 chest is 58cm / 22.3/4″ then set the finished shirring at 52cm / 20.1/4″ this will give enough tension without being tight. Elastic strength can vary so it’s always best to check the finished size before securing the elastic rows.


     Your shirring is finished and you can complete the dress.

5/ Make the skirt: before you sew up the side seam sew the border on, overlock the seam and press. Next sew the rickrack on using a matching thread for this.

Sew the side seam, overlock and press. Stitch the top part of the seam flat where the shirring is, this will make sure the seam does not rub when wearing.


Press the hem under and top stitch.

Make the straps: fold the straps in half along the length and stitch around the edge. Clip the corners, turn out through the bottom opening, press to get an even edge. Turn the raw end in and stitch closed or overlock to finish.

Make the back loop. Double turn the fabric to form a narrow strip and stitch.To attach the loop find the center of the back and pin the middle of the loop in place and stitch down. Stretch the shirring flat and stitch each end of the loop down just below the elastic to form a double loop.


Attach the straps: on the front, locate the center and pin the straps about half way between there and the sides. Sew the straps in place stretch the shirring out when you stitch and sew just above the elastic. Thread the straps through the loops and tie into a bow.




Notes for a Shirred Top

ZigZag Shirring Tutorial by Felicity Sewing Patterns blog post

To make the top you can follow all the instructions as given above for the dress. The only difference is that you need to determine what finished length you want your top to be. For my size 6 I halved the length of the dress from 56cm to 28cm [ this includes the hem allowances]. Whatever finished length you decide on you must add 4cm/1.5″ for the hems. You can tie the straps at the back neck halter style or add the loop as shown on the dress to tie the straps at the back bodice.

The shirring rows can also be varied in number and spacing; on my top I spaced my 6 rows 3cm/1.25″ apart.

When plotting out the rows start at the top and space them to fit evenly to end just above the waistline. The number of rows and the width of the spacing will depend on the size you make. You can make a more floaty little top by just doing 2 or 3 rows at the top and leaving most of the body loose. It is easy to add an extra row if needed.


See below for required materials. The main body piece is on the fold.



The lighter the fabric you use the softer and more comfortable the top will be. I used a very lightweight poly cotton. Lawn, voile and poplin are all suitable.



Follow the main tutorial to make the shirring and sew the top together.

Free Pattern Sewing Tutorial for the Christmas Glitter Skirts

Sewing tutorial for the Christmas Glitter Skirts free pattern download by Felicity Sewing Patterns.

Get your FREE PATTERN and see how to  make these gorgeous, glittery Christmas skirts. Go to the SHOP and look for the ‘Free Patterns’ shop section in the Menu.

Glitter Skirt Pattern

Welcome to the Sewing Tutorial for the Christmas Glitter Skirts.

Using this free skirt pattern and the appliqué templates you can create two different design options for your girls to wear this Christmas season.  The pattern is the same as the free Duckie skirt also available on my web site shop. Many of you will already have the Duckie skirt pattern, we are using this pattern but with new appliqué designs. The skirts are super easy to make, just follow the tutorial closely for a perfect result.

Option one: add gorgeous bobble decoration appliques to create a unique and delightfully festive, fun little skirt just perfect for all those kid’s Christmas parties or a lovely gift for a little girl to wear on Christmas Day.

Option two: for a very fast and easy option just add a layer of bright, glittery Christmas organza or similar fabric and bingo! you have a Christmas Fairy skirt. This is great if you have to make skirts all round.

You can also use the pattern and templates to create your own unique designs. Choose the fabrics, colours, shapes and trims and place them any how you like.

SIZES to fit girls 9 months to 8 years. Check the size charts for your child’s correct size. The pattern comes in sizes 0, 1, 2, 3, 4, 5, 6, 8. The best guides to choose the right size are height and waist measurements.

Skirt Size Chart and fabric for xmas skirt

Tutorial for the Bobble Appliques

 Print out the pattern and applique templates. Cut out the skirt front and back using the pattern. Check that you have all the parts required. You will also need a variety of colourful fabric pieces, narrow satin ribbon or braid, gold sparkle tape or ribbon, small gold bells, adhesive backing for the applique shapes and matching threads. Plus elastic for the waist.


 1/ Press the waist turning under by following the notches and the hem under 1cm / 3/8” but do not stitch down at this stage.

2 2/ Cut out the appliqué pattern shapes you want to use and position them on the skirt front to check the size and spacing. See my photo as a guide.


Cut pieces of fabric large enough to fit the appliqué patterns and cut adhesive backing to fit the fabric.


3/ Fuse the adhesive backing onto the wrong side of the fabric piece. Do this between some tissue paper so the adhesive does not get on your iron.


4/ Trace around the shape on the paper backing and cut out. I cut a slightly wider shape in red to frame my shapes and give more definition.



5/ Peel the adhesive backing off the shapes. Layout the shapes on the skirt front and work out what trims you want to add. You can design this any way you like, I decided to line my decoration up with one at the center and one either side. For the strings I used some satin ribbons and rickrack with a gold mesh tape placed over.


When you are happy with your design sew the ribbon strings on with a single row of stitching.

6/ I used some small pieces of gold tape stitched across my applique shapes to add a little extra glitter. Peel off the paper backing and sew the tape onto the front of the shapes. If you have a backing piece stitch the two pieces together. See below for stitch setting details.

7/ Place the prepared appliqués onto the skirt positioning them over the ends of the strings and fuse them on with the iron. Sew around the shapes with a zigzag stitch.

9  10

I used a zig-zag stitch set at a small stitch width and short length so the stitches are not too wide and very closely spaced but the effect is not as heavy as satin stitch. The stitching should stay within the edge of the appliqué piece so you get a smooth outline. Use matching or toning thread. I used red on all my shapes as this blended well with all the fabrics used.

For a neat finish pull the threads through to the underside and tie off. Give everything a light press.


8/ Put the finishing touches to the appliqué design. I used the gold tape to make little bows to place on each bobble and also attached two small bells. Using a thick thread hand sew the bells onto the top of each bobble then stitch the bows on to finish.


 Sew up the skirt

9/ Open out the top casing and sew the side seams from top edge to hem edge, overlock and press. Press the waist casing under again and sew down leaving a small gap to insert the elastic. Thread the elastic into the waist and secure the ends, close the gap.


10/ Overlock the hem edge press under 1cm / 3/8” and top stitch. Finished!


Easy Glitter Skirt in Tinsel Fabric

Check that you have all the parts.

FABRIC: the fabric length is the same as the bobble skirt but for this skirt you will need a lining layer if you are using a sheer fabric such as the one I have used.

To avoid having a scratchy waist band I used a wide, readymade satin bias binding for the elastic casing and a narrower elastic – 1/2″ / 12mm.

Start Sewing

1/ Sew the side seams on both skirt layers, overlock and press. Pin the layers together at the waist.

15 16

2/ I have used some readymade wide satin bias binding to make the waist casing because the glitter fabric would be very scratchy around the waist. I have not trimmed the top down which means the skirt will be a few centimeters longer than if I had folded the casing down. Run the bias around the top edge to get the correct length and join to form a circle.

3/ Pin the bias to the waist on the right side and sew on with a 6mm/1/4″ seam. Fold down on the inside, pin and stitch down. Leave a small gap to thread the elastic into the casing.

17 18

4/ Overlock the under layer hem, press under 12mm and top stitch. Double turn the top layer hem under 6mm, press lightly and top stitch. Alternately overlock the edge and turn under 6mm and top stitch or use a serger stitch to edge the hem.


5/ Thread the elastic: use a 10 or 12 mm / 3/8 or 1/2″ elastic to fit the narrower bias casing. Secure the elastic ends and close the gap.




All Finished! You can add a wide satin ribbon sash at the waist as a finishing touch.

Glitter Skirt


Sewing Tutorial for the Duckie Skirt Free Pattern

Get your FREE PATTERN and see how to  make this adorable little skirt in TWO variations! Go to the SHOP and look in the ‘Free Patterns’ shop section.


Duckie Skirt PDF Pattern cropped

Sewing Tutorial for the Duckie Skirt

There are numerous ways to use the Duckie Skirt pattern, here you can see two cute and easy options.

1/ Little Duck appliqué: simple easy appliqué with ric-rac braid border.

2/ Button Flower embroidery: so easy to make, all you need are some colourful, small buttons and two ric-rac braids to make a border.

You can add your own ideas to this basic pattern style to make a special skirt for a little girl. Sizes from 6 months to 8 years. Check the size charts for your child’s correct size. Pattern comes in sizes 0, 1, 2, 3, 4, 5, 6, 8.

Fabric length is based on a cloth width of 112cm or 45 inches. The elastic lengths for all sizes are listed on the pattern.

Skirt Size Chart in Centimeters

1sCheck that you have all the pieces for the applique.

Cut out the skirt back and front pieces. Gather together all the parts required; see below for applique parts. Ric Rac braid, elastic for the waist and matching all purpose sewing thread for fabric, braid and applique.

Make the Duckie Applique

Fabric for the appliqué: you need an 18 x 13cm or 6”x 5” piece of bright yellow cotton homespun or drill and a tiny scrap of orange for the beak; adhesive appliqué backing like Vliesofix to fit the yellow fabric; a small length of bright ribbon for the bow and a small goggle eye or black button for the eye. Matching thread for stitching applique.

1/ Fuse the adhesive backing to the back of the yellow fabric and the beak scrap, place this between some tissue paper to protect your iron from the sticky adhesive.

2/ Cut out the duck template and trace it onto the paper backing. Note: the appliqué will be the reverse way round when you apply it to the skirt.side x side3/ Peel the paper backing off the duck shape. Position the ric-rac and the shapes onto the front skirt remembering to allow for the hem turning. The duck looks best placed off center.side by side 14/ Use a pin to hold in place till you are ready to fuse. Fuse the main duck shape first and then the beak. Use paper to protect the iron.side by side 25/ Set the stitch on your machine; you can use a small width zigzag or a satin stitch or your machine might have more options. I used a zigzag stitch set at a small stitch width and short length so the stitches are not too wide and very closely spaced but the effect is not as heavy as satin stitch. The stitching should stay within the edge of the appliqué piece so you get a smooth outline. Use matching thread. For a neat finish pull the threads through to the underside and tie off.                                                                           6/ Tie a small ribbon bow and hand stitch to the neck, stick or stitch the eye in place. Finished!2s

Sew the Skirt Together

1/ Sew one side seam together, overlock and press. Pin the ric-rac braid in place just below the duck and sew it on with a large zigzag stitch using matching thread.3sNo Overlocker? Just use the zig-zag stitch on your plain machine to finish the seam edges. 2/ Overlock the hem edge and press the 12mm / ½” hem allowance under. Press the top edge under, double fold in 1cm / 3/8” then 2.5cm / 1” to form the elastic casing channel, do not stitch down at this stage.4s3/ Sew the remaining side seam from top edge to hem edge, overlock and press.             4/ Re-press the hem and casing turnings where needed. Top stitch the hem and the edge of the turned in casing leaving a small gap to insert the elastic near one side seam.                                                                                                                                                               5/ Cut the elastic to the right length for your size; lengths are marked on the pattern. Use a large safety pin to insert the elastic, sew the ends together securely and stitch the gap closed.  Finished!5s








 Finished!  One cute and easy little skirt.



Sewing Tutorial for the Button Flower Embroidery

For the Button Flower you need some small buttons in colors suitable for a flower and leaves. I used 16 buttons in the flower plus the center large button and 6 buttons for the leaves. I had some butterfly shaped buttons which I added. If you are making a very small size, use smaller buttons, my sample is a size 4.

My skirt is in pin-wale corduroy which is ideal for the button embroidery. You will need a medium weight fabric like drill or denim preferably.

Two rows of bright ric-rac braid in different widths and colors. See the fabric chart at the top of this tutorial for the length required for each row. The flower stem is also in ric-rac so add a few inches to the length for this.

 OPTION: If you do not want to do the button flower, an easier option is to simply sew several colorful rows of braid around the skirt. You can do from 3 to 6 rows using different colors, sizes and types of braid to get a very striking effect.

6b1/ Prepare the skirt; cut out the skirt front and back. Sew one side seam, overlock and press. Overlock the hem edge and press the hem allowance under. Press the double turned top edge casing allowance under but do not stitch anything down at this stage.


2/ Lay the skirt out flat and position the rows of ric-rac braid in place above the hem. Cut a length of ric-rac for the stem about 12cm / 4.3/4” long. The flower looks best when placed in the center of the skirt front, so pin the stem in place so that the bottom edge is covered by the top ric-rac row. You will need to adjust the stem length a little for larger and small sizes.1b3/ Stitch the rows of braid and the stem in place with a zigzag stitch using matching thread for each colour.2b4/ Lay out the flower buttons; you can see from the photo how I did mine. You will need to use flat 2 or 4 hole buttons.3bOnce I had the layout right I used craft glue to stick the buttons in place. This makes the stitching process so much easier but you must take care to use only a small amount of glue on each button and to not spot the fabric with glue. Put it aside for an hour or two for the glue to dry. If you don’t have glue use a chalk pencil to mark the center of each button.4b5/ Gather up some matching thread, a needle and clippers, make a cup of coffee, put on your favorite music and sit down and sew each button on.3b6/ All you need to do now is finish stitching the skirt. Sew the remaining side seam, stitch the hem and casing, insert the elastic and it’s Finished! For sewing details to finish the skirt see the above tutorial for the Duckie Skirt.Duckie Skirt PDF Pattern croppedscroll






Sewing Tutorial for the Play Pants free pattern with bonus Christmas tree applique.

Get your FREE PATTERN and see how to make these cute and easy kids pants plus XmasTree applique.

Get your FREE PATTERN and see how to  make these cute and easy kids pants. Go to the Shop and look in the ‘Free Patterns’ shop section — Play Pants Free Pattern or click here Free Pattern — just add the pattern to the cart and ‘buy’ it for free. Then view the sewing tutorial here to see how to sew the pants.                                                                      

When you get your free pattern please leave a Comment in the box at the end of the sewing tutorial.Free Pattern blog post Felicity Sewing Patterns Play Pants kids sewing patternThe Play Pants pattern is a basic pant pattern with a patch pocket in sizes to fit kids from 1 to 10 years old. The pattern includes a simple easy to make Christmas tree appliqué to use on a T shirt or skirt. The pattern is suitable for boys and girls and is ideal for pyjama pants. The basic pattern can be altered to have a cuff or ruffle on the hem. The length can also be adjusted to shorts or 3/4 length pants. This is a very easy pattern, great for beginners.

The T shirt pattern is not included as a free pattern but can be purchased from Felicity Sewing Patterns website shop at the discounted price of US $4.00.

To see the full range of delightful kids pdf digital sewing patterns please visit the online shop —                                                                   Find us on Etsy —-


FABRIC: This depends on the finished use of the pants; pyjamas require soft, lightweight cottons or minimal stretch knits e.g. lawn, poplin, flannel or interlock. For day wear any light to medium weight wovens or knits e.g. homespun, drill, pin-wale corduroy and fleecy. Check the fabric chart for the amount of fabric and elastic required. The fabric lengths are based on 112cm/45″ standard fabric width. Lengths are given for the main with contrast option as shown in the tutorial and also for the basic unaltered pant in one fabric only. The elastic is 22 – 25mm or 3/4″ – 1″ wide x the length given on the chart. Matching sewing thread. You can add extra trims e.g. lace, braid or piping.

SIZING: Patterns sizes = 1, 2, 3, 4, 6, 8, 10 to fit kids 1 to 10 years approx. Check the size chart to select the best size for your child based on their height and waist measurements. The leg length can be easily adjusted if necessary.charts-1

PREPARE THE PATTERN                                                            

1/ Print out the pattern pages and glue them together – see the Printing Instructions and Guide to Assembling the Pattern Pages included with the pattern file.1Trace out a paper pattern for the size you want following the colour code. You can do this by tracing with a tracing wheel onto plain paper or using see-through baking paper and trace with a pencil. I think it’s easier to use a tracing wheel so invest in one of these. Tracing the pattern out means you can keep the master pattern intact for future use. Please note that all cutting out instructions, seam and hem allowances and grain lines are marked on the pattern.3  It’s very important to get the grain straight when cutting long pants; the best way to get the perfect straight grain is to fold the pattern in half placing the hem edge perfectly square and equal and then press a cease in along the full length of the leg to get the grain line then mark with a pen and ruler.4Rule a line for the hem turnings and the waist turning these are both 4cm/11/2” wide. Don’t forget the pocket pattern.2Now the basic pattern is ready to use.


I decided to add a contrast cuff to my basic pants so here’s how to alter the pattern: decide on the width you want; for my size two I used 8cm /3 1/4 inch, this would be a good width for all sizes. Measure up from the hem turning or finished length of the pant and rule a line then add a 1cm/3/8” hem allowance, fold the unwanted part of the pattern under and pin to hold. Do this on back and front. Place the side seams together, overlapping 2cm/¾” and measure the total circumference/length of the hem, 38cm for size 2. Make a pattern for the cuff 38cm x 9cm [the finished cuff width + seam], fold double and cut out. The total pattern dimensions for a size 2 would be 38cm x 18cm. Label “Cut 2”.524NOTE: If you would like a ruffled hem follow the instructions as for the cuff but use a single width not double [e.g 38cm x 10cm] and add extra length for gathering — about half to two thirds — so total pattern dimension of approx 57cm x 10cm for a size 2. Label “Cut 2”.  OK! this is what you should end up with ———6

CUTTING OUT                                                                

I am using the contrast print for the cuffs and pockets. The size 2 just fits nicely into the folded fabric width. If you are using a one-way-up print the patterns must be cut the same way up. The fronts and backs have to be cut paired or mirrored. Refer to the original pattern printout for cutting instructions, grain lines and seam allowance details marked on the pattern.7


Make the pockets: overlock around the edges. Fold the pocket hem to the outside and sew down at the sides. Turn to the inside, press the seam allowance under all around and sew the pocket hem down. All seam allowances are 1cm/3/8″.9Make the Pants: sew the side seams together, overlock and press. Press the waist casing under so you can see how wide the waist band will be.10Place the pockets on the front at least 6 cm below the finished top edge at the side seam position and about 1cm in from the side seam, pin and sew in place. The pocket position will vary with the size so just make sure it looks balanced.11Sew the centre front and centre back seams, overlock and press. Sew the inside leg seams together matching at the crotch seam, overlock and press.12Pockets stitched on and seams all sewn together.13Attach the cuffs: press each cuff in half lengthways, then check that the cuff and leg measure exactly the same and make any necessary adjustments. Sew the cuff seam and press open.14Fold the cuff in half again and pin to the right side of the leg with the cuff seam at the inside leg seam. Sew in place, overlock and press. On the outside sew a row of topstitching along the seam to hold the seam flat on the underside.15Make the waist casing: The total width of the casing allowance is 4cm/11/2”. For a neat finish press the edge of the casing under 1cm/3/8” and turn casing under along the finished edge line [you pressed this under earlier]. Sew the casing down and sew a row of stitching along the top edge to give a neater finish after the elastic is inserted.

Use a seam ripper to open the centre back seam into the casing and insert the elastic here. Securely stitch the elastic ends and distribute the fullness evenly around the waist. To stop the elastic rolling stitch across the casing through the elastic at the centre front seam.16FINISHED!17

Christmas Tree Applique Sewing Tutorial

Here is a simple easy appliqué that can be used on a T shirt front or on a skirt. I am making a T shirt top to go with my Play Pants so I will apply the appliqué directly to the front of the shirt before I stitch it together. However if you want to add the appliqué to an existing shirt you can construct it onto a square of fabric making it easier to simply sew the square to the front of the shirt. The appliqué comes in two sizes and the template is included in the Play Pants pattern file.

Play Pants and Xmas Tree Applique by Felicity Sewing Patterns 3


Fabric scraps, iron-on appliqué backing, sewing thread plus you can add extra trimmings e.g. beads, buttons or glitter. Pinking shears if you already have them are best for cutting out the shapes but not essential. I am going to machine stitch my appliqué but if you are an experienced crafter you might prefer to hand sew everything.

Print out the templates and carefully cut them out, use them to cut out pieces of fabric slightly larger than the shape of the template.18Next cut a piece of iron-on backing for each shape and iron this onto the back of the fabric shapes; make sure to use a light pressing cloth or some tissue paper to protect the iron and ironing board. Now each shape will have a paper surface on the back. Use the templates and draw the shapes onto the paper backing, cut them out carefully with sharp scissors or pinking shears. If you are hand sewing it’s best to cut with plain scissors.19Carefully peel the paper backing off and layout the design overlapping each piece a small amount [about 6mm/¼”]; line everything up as though you are following a centre line so you have tree trunk, bottom layer, middle layer, top layer and star. It’s best to do this on the ironing board so there’s no need to move once it’s set in place. When you are happy with the way it looks press it on firmly.2021Now sew around all the edges; use a plain stitch if the edges are pinked or a zigzag if they are plain. To keep it neat stitch each section separately changing thread colour if necessary. Pull the thread ends through to the underside and tie off.2223Makes a cute set of Christmas night pyjamas.Free Pattern blog post Felicity Sewing Patterns Play Pants kids sewing patternscroll